JBL
JBL Clip 3 Portable Bluetooth Speaker
Features:
More Ways to Connect
Don't worry if Bluetooth is not available, plug an audio cable into the JBL Clip 3 and enjoy your music all the same.
Clip it Anywhere
The fully integrated metal carabiner is designed to protect the speaker from damage and allows you to easily hook the speaker onto your backpack or belt loop.
Made for Your Adventures
The JBL Clip 3 features an improved, durable fabric material and rugged rubber housing that protects your speaker on all your adventures.
LED Indicators
The LED indicators inform you when the speaker is low on power, charging, in pairing mode, or receiving an incoming call. It also notifies you when the speaker is not connected via Bluetooth or if you are taking a phone call.
Specifications:
JBL Clip 3 | |
Speaker System | |
Power Output | 1 x 3 W |
Drivers | 1 x 1.57" / 40 mm |
Frequency Response | 120 Hz to 20 kHz |
Signal to Noise Ratio | >80 dB |
Microphone | |
Built-In Mic | Yes |
Active Noise Cancellation | Yes |
Bluetooth Connectivity | |
Bluetooth | 4.1 |
Supported Bluetooth Profiles | A2DP 1.2 |
AVRCP 1.5 | |
HFP 1.5 | |
HSP 1.2 | |
Transmitter Power | 9 dBm |
Bluetooth Transmitter Modulation | π/4 DQPSK, 8DPSK, GFSK |
Wired Connectivity | |
Inputs | 1 x 1/8" (3.5 mm) Stereo (Audio) |
1 x USB Micro-B (Power) | |
Outputs | None |
USB Power Output | 5 VDC at 0.6 A |
Battery | |
Capacity (mAh) | 1000 mAh |
Battery Chemistry | Lithium-Ion Polymer (LiPo) |
Battery Voltage | 3.7 V |
Expected Battery Life | 10 Hours |
Physical | |
Memory Card Slot | None |
IP Rating | IPX7 |
Dimensions (W x H x D) | 5.4 x 3.8 x 1.8" / 13.72 x 9.65 x 4.57 cm |
Weight | 0.5 lb / 226.8 g |